Home Downloads Software for Skipper products
Monday, 06. February 2012

Login Form



Software for Skipper products

DocumentsDate added

Order by : Name | Date | Hits [ Descendent ]
file icon DL850 - Software upgrade instructions - Read this before attempting upgradeTooltip 03/02/2011
file icon EML224 software v1_27_21Tooltip 03/16/2010
Software update for versions with Compact flash disk . Some fixes in NMEA output formats VBW and VLW. Valid for cabinets 09XXX onwards
file icon GDF201 Software v.3.01.03Tooltip 11/25/2009
file icon GDS101 Software upgrade instructions for v5.05.XX.Tooltip 08/14/2009
Instructions on how to perform an upgrade on GDS101 units with Compact flash. (Version EN101C-XX)
file icon GDS102 Software 1 12 4Tooltip 11/10/2010
file icon Previous Software update for DL850N/D27-SB/SC (270kHz Version) sw v .4.1.21Tooltip 08/14/2009
Software upgrade for the 270kHz version of the DL850 display cabinet. software version 4.1.21 , includes new 2007 formating regulation. This software is now replaced.
file icon Recomeded upgrade for DL850N/D 540khz verison sw V 4_01_31Tooltip 06/27/2011
Recomended upgrade of software for the DL850 display cabinet for the 540 kHz system. Includes bug fixes, a diagnostics screen and new speed indicator. See manual for details.
file icon Recomended Upgrade for GDS101 (EM101C-SX) sw v GDS101_5_05_13Tooltip 06/27/2011
Software upgrade for all GDS101 with a Compact flash disk from serial numbers 083250, 101360, 201200. (for systems with software 5.05.XX) This software includes bug fixes and an extra PSKP sentence for demo modes.
file icon Recomended upgrade for the DL850N/D27 (270 kHz) SW V DL850_sw_4_3_00_For_270kHzTooltip 06/27/2011
Major Software Release that includes a number of fixes, and a new Diagnostic screen replaces Scope screen, allowing self diagnostics of sensors and wiring.
Additional Speed indication allows an output to be used for indicating a speed band for rudder limiters or stabilisers
More detail in the manual 
file icon STARTUP V 1_01_17 - used for all systemsTooltip 06/27/2011
Change the name of the file to STARTUP.EXE, and copy onto the systems compact flash overwriting the old version.      
This utility loads new software versions into the SKIPPER graphic displays. This file should be copied into the compact flash together with the software. NOTE: OLDER SOFTWARES MAY LOOSE SETTINGS WHILE UPGRADING- NOTE CALIBRATION AND SETUP SETTINGS BEFORE UPGRADING.