Home Software for Skipper products
Thursday, 09. September 2010
Software for Skipper products

DocumentsDate added

Order by : Name | Date | Hits [ Descendent ]
file icon DL 850 Software upgrade instructions - Read this before upgrading!Tooltip 11/03/2008
file icon EML224 software v1_27_21Tooltip 03/16/2010
Software update for versions with Compact flash disk . Some fixes in NMEA output formats VBW and VLW. Valid for cabinets 09XXX onwards
file icon GDF201 Software v.3.01.03Tooltip 11/25/2009
file icon GDS101 Software upgrade instructions for v5.05.09.Tooltip 08/14/2009
Instructions on how to perform an upgrade on GDS101 units with Compact flash. (Version EN101C-SB or SC)
file icon Previous Software update for DL850N/D27-SB/SC (270kHz Version) sw v .4.1.21Tooltip 08/14/2009
Software upgrade for the 270kHz version of the DL850 display cabinet. software version 4.1.21 , includes new 2007 formating regulation. This software is now replaced.
file icon Recomended DL850N, DL850D, (540Khz) v 4_01_30Tooltip 08/04/2010
Recomended upgrade of software for the DL850 display cabinet for the 540 kHz system. software version 4.1.30 including bug fixes and new 2007 formating standards, and fixes a bug in the trip counter.
file icon Recomended Software update for DL850N27, DL850D27 (270Khz) version 4_02_03Tooltip 12/03/2009
Major Software Release that improves display features and accuracy. With Transceiver cabinets with part number DL850T27-SA (supplied until late 2009), It is advised (although not critical) to also change the PLD software chip in the transceiver cabinet to fully utilse all the improvements (Part No. LG-T001). Transceiver DL850T27-SB already contain the PLD- Change of this softweare changes cabinets from part number DL850N/D27-S(C) to SD, parts SA and SB remain the same. A new manual is also available for this software.
file icon Recomended upgrade for GDS101 (EN101C) for systems with software 5.05.XX - software version 5 05 09 Tooltip 08/14/2009
Software upgrade for all GDS101 with a Compact flash disk from serial numbers 083250, 101360, 201200. This software includes bug fixes (printer fixes, etc.) and new 2007 standards for presentation and dimming. see seperate installation instructions.
file icon STARTUP.exe V1.1.15Tooltip 08/04/2010
Change the name of the file to STARTUP.EXE, and copy onto the systems compact flash overwriting the old version.      
This utility loads new software versions into the SKIPPER graphic displays. This file should be copied into the compact flash together with the software. NOTE: OLDER SOFTWARES MAY LOOSE SETTINGS WHILE UPGRADING- NOTE CALIBRATION AND SETUP SETTINGS BEFORE UPGRADING.